This is a 10-pin socket with 2mm pitch that mates with the popular WiFly radio from RN Networks or the XBee radio from Digi. Use this small part to avoid having to solder your precious radio to a PCB. You'll need two of these sockets to connect to all 20 pins on the XBee.
40 pin by one row straight header. These can be cut to size. Solder to project boards to connect jumper cables and other standard 0.1 inch or 2.54mm connectors. 2.54 PIN HEADER DIP STRAIGHT SINGLE ROW 1X40PIN GOLD FLASH OVER ALL
Break away header 16x1. This is one of those must have pieces in your kit. It allows you to gender change those female headers and jumper wires. The long pins will plug into those typical headers used on devices like Arduino and chipKIT boards.
This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm.We really like the solid locking feeling and high current rating on these small connectors. This connector will mate with all of our LiPo batteries.
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 150mm (6" length) aprox.
Black plastic RJ45 connector or sometimes known as 8P8C connector. This is a very low profile version (11.5mm) with black insulator. It does not have a panel stop. Pins are gold plated. These don't have any magnetics in them so can be easily used for non-networking purposes like 1-wire networks. Use with our